Lexicon Digital Controller MC-12 - Manual (Page 139)

MC-12 Mode Adjust
5-13
PANORAMA CALIBRATION
Select PANORAMA CALIBRATION to open
the PANORAMA CALIBRATION menu shown
to the left, to calibrate the PANORAMA
listening mode. This listening mode must be
calibrated to take full advantage of its
effects.
For best results, you should center the
primary listening position between the front
left and right speakers as shown in illus-
tration B at the top of the next page (center). Otherwise, the
PANORAMA listening mode will be calibrated with varying results.
An external calibration source is required to calibrate the
PANORAMA listening mode. You should select a familiar stereo
source.
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-37 for detailed
descriptions
.
MODE ADJUST PANORAMA CALIBRATION
PANORAMA CALIBRATION
SOURCE
SPEAKER ANGLE
LISTENER POS
NOTE:
ENSURE THAT
“SPEAKER SETUP” HAS
BEEN PROPERLY
PERFORMED
LEFT & RIGHT
30deg
+0
Parameter Default Setting Possible Settings
SOURCE LEFT & RIGHT RIGHT, LEFT & RIGHT, LEFT
SPEAKER ANGLE 30deg 10deg to 90deg
LISTENER POS +0 -127 to +127