LaCie Drive - Manual (Page 10)

LaCie Brick Mobile Hard Drive
User Manual page 10
Getting Connected
To use your new LaCie hard drive, first install the
necessary driver software and Silverlining 98. Follow
the steps below to install the necessary drivers and
software to configure your drive. Then move on to the
power supply and USB 2.0 installation steps in sections
2.3 and 2.4.
USB 2.0 Driver Installation
Insert the LaCie Storage Utilities CD-ROM in your 1.
computer’s internal CD/DVD drive and double-click
the disc’s icon when it appears on the desktop.
Double-click the
2. USB 2.0 Drivers Install folder.
Double-click the 3. LaCie_USB_Driver_Install.exe
icon. The LaCie USB2 Storage Driver screen will
appear. Click Next .
Installation will finish automatically. 4.
Silverlining 98 Installation
Re-open the LaCie Storage Utilities CD-ROM. 1.
Double-click the Silverlining 98 folder. 2.
Double-click the 3. Silverlining98_Install.EXE icon.
Silverlining 98 will then initialize the install screen. 4.
The “Welcome” screen will appear. Click 5. Next .
The “Destination Location” screen will appear. To 6.
alter the location where the software is installed on
your system, click the Browse button. If you do not
want to change the location, click Next to allow the
software to be installed in its default location and
continue.
Next is the “Start Installation” screen. Click
7. Next .
The software installation will begin, and you will see 8.
the installation screens.
Finally, you will see the “Silverlining 98 has been
9.
installed correctly” screen. Click Finish to complete
the installation. Now move on to section 2.3 .
ImpOrTANT INfO: This step is necessary
ONLY for Windows 98 SE and Windows ME
users. See page 9 for installation steps necessary
for your operating system.
2.1. Installing Silverlining 98 and USB 2.0 Driver (Windows 98 and Me
Users)
USB Drivers
Silverlining 98
Fig. 2.1.A
Fig. 2.1.B