Lyson PHOTOCHROME R-38 - Manual (Page 8)

STEP 13
Perform manual nozzle check prints and cleaning cycles until you get a good nozzle
check. Do not use the auto nozzle check function as this just wastes ink. You may
need to perform 4 – 5 manual head cleanings before you get a good nozzle check. If
so be sure to leave at least 5 minutes between a head clean and a nozzle check print.
This allows time for the air pressure within the system to equalize.
Once you have achieved a good nozzle check pattern you are then ready to start
printing.
Please read the Lyson 3800 CIS Operating Instructions next. This will show you how to
operate your CIS system, use the printer profiles supplied, and how to take advantage
of our special custom profile offer.
Nazdar Worldwide Headquarters
Nazdar Limited
8501 Hedge Lane Terrace, Shawnee, KS 66227 3290 USA Barton Road,
Heaton Mersey, Stockport, England SK4 3EG
Toll Free: 866.340.3579 or Tel: 913.422.1888 Fax: 913.422.2296
Tel: + (44)
0.161.442.2111 Fax: + (44) 0.161.442.2001