Lucent Technologies 03.0.042.2 - Manual (Page 7)

Issue 1 July 2000 5
Change Descriptions Change Descriptions
The following problems have been addressed and corrected in DEFINITY
Enterprise Communications Server (ECS), Release 8, Issue 3.0 (03.0.042.2).
1. When switching between PPP and X.25 type data modules, two copies of
the Establish Connection field on the data module form appeared.
2. If Music on Hold for the class of restriction for an analog station was set to
"no" and that station was bridged to a digital station, the analog station was
blocked from flashing to transfer or conference a call.
3. Analog-originated calls coming in ISDN trunks from the NTT Network did
not disconnect properly when the PBX sent an ALERT message followed
by a DISCONNECT message. An administrable option on page 2 of the
trunk group form now allows the PBX to send a CONNECT message
before sending the DISCONNECT message, for analog-originated calls
that come in on trunks in that trunk group. Thus, analog originated calls
coming in ISDN trunks (so administered) from the NTT Network will
disconnect gracefully.
4. The system could go into overload if a sufficiently large number of calls
were executing a poorly written vector (i.e., a vector with a loop not
containing a wait step). Time breaks will be inserted in vector processing
more frequently now, when the system experiences high processor
occupancy.
5. Basic Rate Interface (BRI) trunks failed to make an outgoing call, if the
network did not allocate a Terminal Endpoint Identifier (TEI) on the
previous outgoing call attempt.
6. When selecting “help” in the AUDIX Name or Messaging Server Name
fields on the hunt group form, the help message directed the user to a
form which was no longer supported. This occurred if no “audix” or “msa”
nodes were specified on the node-names form. This help message now
directs the user to the appropriate form.
7. Attendent Direct Extension Selection (DXS) access failed if the ARS
shortcut was enabled.