Lumens Technology DC260 - Manual (Page 46)

Chapter 8 Connecting to Microscope
1. Mount the microscope adaptor onto the microscope.
2. The lens of DC260 connects with the microscope adaptor.
3. Select the[Microscope]Mode
3.1. Press [M Scope]on the remote control (suggestion).
3.2. Control panel
3.2.1. Press [MENU] to enter the setting menu.
3.2.2. Press [f] or [e] to select [Display].
3.2.3. Press [d] to select [Mode].
3.2.4. Press [f] or [e] to select [Microscope].
4. If the image is not clear.
4.1. Please adjust the focus of microscope.
4.2. Press the AF button on the camera head of main unit to activate the
auto focus.
5. Digital Zoom
5.1. Press [MENU] to enter the setting menu.
5.2. Press [f] or [e] to select [Display].
5.3. Press [d] to select [Digital Zoom].
5.4. Press [f] or [e] to select [On].
5.5. Press [Zoom +]/[Zoom -] on the remote control and control panel
In microscope mode all functions are available except for the
[Zoom +] / [Zoom -] / [Half Page] functions on the remote control and
control panel. Please reset to normal mode after using the microscope,
otherwise, you are unable to use zoom in/out function.
1. Press [MENU] on the control panel to enter the setting menu.
English - 45