Knoll Systems Front Projector 1080p DLP - Manual (Page 38)

37
Easy to Use Functions
Selecting the Picture Display Mode
This function allows you to modify or customize the picture display mode to enhance the
input image. Depending on the input signal, you can choose “Anamorphic”, “Standard”,
“LetterBox”, or “Virtual Wide”.
Switching the Picture Display Using
Different input signals
Press on remote or on keypad
and select layout.
• Each time is pressed, the display
changes as shown on page 38 and 39.
Aspect Ratio Function
The layout menu enables you to control how
the projector resizes the input image.
The following options are available:
MENU
INPUT 1
INPUT 2
INPUT 3
INPUT 4
Aspect Ratio
Anamorphic
• Resolution 1920x1080
• 4:3 input is stretched to fit 16:9 display
• Stretches entire image.
Standard
• Resolution depends on the Input Signal
• 4:3 input scaled to fit display height
• Width scaled to maintain 4:3 aspect ratio
• Black bars on left and right (taking up 25% of
the whole display)
LetterBox
• Resolution 1920x1080
• 4:3 input scaled to fit display width
• Height scaled to maintain 4:3 aspect ratio:
1440x1080
• 25% of the entire image on the top and bottom
is cropped.
Virtual Wide
• Resolution 1920x1080
• 4:3 input is stretched to fit 16:9 display
• With 4:3 input, the central ratio remains true to
scale, but the image is stretched to fit display
width.
• 16:9 input image is identical to the one
displayed in Anamorphic mode.