Kompernass KH 3462 - Manual (Page 6)

- 6 -
• The assembled meat grinder t is connected
to the motor block r by a bayonet connector:
- Insert the meat grinder casing t into the mo-
tor block r , such that the arrow on the fee-
ding shaft lies against the symbol on the
motor block r . The locking button presses it-
self in (Fig. Ạ).
- Lightly press the meat grinder casing t in and
at the same time turn the feeding shaft on the
meat grinder casing
t into the middle position
(Fig. ạ), so that the arrow on the feeding shaft
lies against the symbol . When the meat
grinder casing t engages, the locking button
springs out.
- Finally place the feed tray e on top of the
feeding funnel.
- To dismantle it, press the locking button and
turn the feeding funnel to the right (Fig. Ạ) .
You can now pull the meat grinder casing t out.
b) Assembling the sausage attachment
Unfold the fold-out side. There you will find the
step-by-step illustrations for assembling the appliance.
• Remove the meat grinder casing
t as described
under a).
• Disassemble any attachments that might be fitted
and clean the meat grinder casing t .
Note:
The cross blade i with the spring u is not requi-
red for the sausage attachment s ! If need be, re-
move them both from the meat grinder casing t .
• Coat all metal parts with cooking oil.
• Take the sausage disc
d from the small com-
partment on the top of the appliance (Fig. Ả).
• Position the sausage disc d so that the indenta-
tions in the sausage disc d lie on the fixing
points in the meat grinder casing t .
• Then place the sausage attachment s before
the sausage disc d .
• Screw the ring clamp a on hand-tight.
• Assemble the meat grinder casing t as described
under a).
c) Assembling the kubbe attachment
Unfold the fold-out side. There you will find the
step-by-step illustrations for assembling the appliance.
• Disassemble the meat grinder casing
t as de-
scribed under a).
• Disassemble any attachments that might be fitted
and clean the meat grinder casing t .
Note:
The cross blade i with the spring u is not requi-
red for the Kubbe attachment f ! If need be, remo-
ve them both from the meat grinder casing t .
• Coat all metal parts with cooking oil.
• Insert both plastic parts of the Kubbe attachment
f so that the indentations on the Kubbe attach-
ment f lie on the fixing points in the meat grin-
der casing t .
• When everything has been correctly assembled,
screw the ring clamp a on until it is handtight.
• Assemble the meat grinder casing t as described
under a).
d) Assembling the biscuit pastry
attachments
Unfold the fold-out side. There you will find the
step-by-step illustrations for assembling the appliance.
• Remove the meat grinder casing
t as described
under a).
• Disassemble any attachments that might be fitted
and clean the meat grinder casing t .
Note:
The cross blade i with the spring u is not requi-
red for the biscuit attachment q ! If need be, remo-
ve them both from the meat grinder casing t .
• Coat all metal parts with cooking oil.
• Remove the pattern strips
q from the front of
the biscuit attachment q .
IB_KH3462_RP30168_LB6.qxd 10.02.2009 15:35 Uhr Seite 6