Kompernass KH 3462 - Manual (Page 5)

- 5 -
To avoid the risk of accidents and
injuries:
• Never put your hand into the openings of the
appliance. Do not insert any objects of any kind
into the openings – except for the appropriate
stodger and the foodstuff to be processed. If
you do, there will be a serious risk of accidents!
• Unplug the appliance from the power source
before attaching or removing accessories.
• Do not leave the appliance unsupervised when
it is ready for use. To avoid it being switched on
accidentally, always unplug the appliance after
use or during breaks.
• Use only original accessories for this appliance.
Other accessories may not meet the safety
requirements.
• This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their
safety or receive from this person instruction in
how the appliance is to be used.
• Children should be supervised to ensure that
they do not play with the appliance.
• Never operate the appliance in a no-load con-
dition. This could irreparably damage the
appliance.
5. Assembly / Disassembly
IMPORTANT: All accessories are coated with
a thin film of oil to protect them from corrosion.
Therefore carefully clean all of the parts before
using the appliance for the first time, as com-
prehensively described on chapter "8 Clea-
ning". After subsequent usage, always apply a
light coating of cooking oil to the metallic
components.
a) Assembling the meat grinder
Unfold the fold-out side. There you will find the
step-by-step illustrations for assembling the appliance.
• Place the transport screw
y into the mincer
casing t .
• Place the spring u onto the transport screw y .
• Then place on the cross blade i so that the
sharp side points away from the spring u .
Caution:
The cross blade i is very sharp! Risk of injury!
Important!:
The appliance will be damaged if the cross blade
i is inserted the other way around!
• Select the appropriate cutting disc – the discs
are stored in the small compartment on the
appliance (Fig.
Ả).
To open it, press on the symbol on the cover.
The cover can now be opened. Take out the
cutting disc that is required
o .
• Position the cutting disc o so that the indenta-
tions in the cutting disc o lie on the fixing points
in the meat grinder casing t .
• When everything has been correctly assembled,
screw the ring clamp a on until it is handtight.
IB_KH3462_RP30168_LB6.qxd 10.02.2009 15:35 Uhr Seite 5