Kingsford 11301648 - Manual (Page 10)

5
6
Attach the Charcoal Pan Assembly to the inside front panel of the Firebox using (4) 1/4-20x1/2” Hex Bolts. Tighten securely
with adjustable wrench (not provided).
Page 10
1/4-20x1/2” Hex Bolts
Charcoal Pan Assembly
Firebox
Hair Pin Clip
Wheel
Axle
Hair Pin Clip
Insert a small Hair Pin Clip into the hole at one end of the Axle. Slide a Large Flat Washer and a Wheel onto the Axle.
Slide the Axle through the holes at the ends of the Legs. Slide the remaining Wheel onto the Axle. Slide a Large Flat
Washer
onto the Axle and secure with remaining Hair Pin Clip.
NOTE: WHEEL HUBS SHOULD FACE LEGS.
Large Flat Washer
Large Flat Washer
NOTE:
Mounting bracket with hole
fits over threaded bushing
Front of Firebox