Konica Minolta IC-401 - Manual (Page 76)

2.9 Scan to E-Mail Function
2-23
Us
in
g th
e S
c
a
nner
M
ode
Ch
apte
r 2
2.9.1 Setting the Controller
To perform mail transmission, enter the settings for accessing the mail server
(SMTP server).
1.
Show the setup screen from the controller operation panel.
2. Select [Network Setup] — [Service Setup] — [E-Mail Setup] and enter
the following settings.
[Enable E-mail Services]:
Select “Yes”.
[Outgoing Server]:
Enter the IP address of the mail server (SMTP).
[Time Out (sec)]:
Set the timeout value for accessing the mail server.
Unless there is a specific reason to do so, use the
default value.
(common setting for the SMTP server and POP3
server)
[Maximum Scan File Size]:
Set the maximum transmission mail size.
3. Start PageScope Web Connection.
4. Enter the password and log into the Administrator Mode.