Kenwood KVT-739DVD - Manual (Page 8)

8 | KVT-739DVD
Installation for Monitor/Player Unit
1. Attach the installation brackets 0 to the sides of
the receiver unit using the sems bolts 8.
2. Use the tapping screw 9 to secure the receiver
unit to the audio board.
Installation brackets
(Accessory
0)
Sems bolts (M4 × 8 mm)
(Accessory
8)
Tapping screw (ш4 Ч 16 mm)
(Accessory
9)
Installation for Receiver Unit
Accessory 6
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
Metal mounting strap
(commercially available) Self-tapping screw
(commercially available)
Screw (M4X8)
(commercially available)
Firewall or metal support
Make sure that the unit is installed securely in place. If the unit is unstable,
it may malfunction (eg, the sound may skip).