KTI Networks KF221TX/3 - Manual (Page 13)

9
3.3 Connecting to the Network
The rear bracket of the Fast Ethernet adapter contains one RJ-45
connector. The connector is used for either 100Mbps 100BASE-
TX connection or 10Mbps 10BASE-T connection. The adapter can
sense the connection speed and switch to appropriate operation
automatically.
Figure 3-4 Network Connector
RJ-45 Pin Assignment Signal Name
1 Transmit +
2 Transmit -
3 Receive +
6 Receive -
4,5,7,8 NC (no connection)
Cabling Requirements:
10Mbps
10BASE-T Ethernet Category 3, 4, or 5 UTP Cable
The maximum distance is 100 meters.
100 Mbps 100BASE-TX Ethernet Category 5 UTP Cable
The maximum distance is 100 meters.