Sennheiser SK 300 - Manual (Page 21)

Adjusting settings via the operating menu
20
Adjusting settings via the
operating menu
The main menu “ Menu ”
Adjusting the input sensitivity – “Sensitivity”
Adjustment range: 0 to –60 dB, adjustable in steps of 3 dB
Make use of the possibility to adjust settings via the
operating menu of your receiver and to transfer
these settings to the bodypack transmitter.
For more information, refer to the instruction
manual of the receiver. The relevant information is
marked with the sync icon.
The audio level display “ AF ”
ቢ
always indicates the
audio level, even if the bodypack transmitter is
muted, e.g. allowing you to check the adjusted
sensitivity before live operation.
Input sensitivity is
adjusted ...
Effect/display
... too high Close talking distances, speakers
with loud voices or loud music
passages cause overmodulation in
the transmission link. The yellow
AF PEAK LED
²
lights up. The audio
level display “ AF ”
ቢ
shows full
deflection for the duration of the
overmodulation.
... correctly The audio level display “ AF ”
ቢ
shows full deflection only during the
loudest passages.
... too low The transmission link is undermodu-
lated. This results in a signal with
high background noise.
Menu
–12 dB
Sensitivity –12 dB
Sensitivity
–36 dB
Sensitivity
“Stored”
Call up
“Sensitivity” Select the desired
setting Store the setting
² MHz 531.375
B.Ch: 20.24
MUTE P
AF
ቢ