Step 7: mounting the drive, Step 8: connecting the power cable, Step 6: connecting the drive – Sony CD-R/RW User Manual
Page 7
![background image](/manuals/154438/7/background.png)
Step 7: Mounting the Drive
Insert the CD-RW drive into computer front as shown, routing cables
accordingly. Secure drive to frame with appropriate screws.
Note:
Slide rails (not included) may be necessary if you cannot secure CD-RW
drive. Refer to your computer’s User’s Guide for more information.
Step 8: Connecting the Power Cable
Locate an available power supply cable, within computer, and connect it to
the rear of CD-RW drive as shown.
Note:
The power supply cable connector is designed to fit one way, do not force
it upside down, this could damage drive and void the warranty.
DC INPUT
GND 12V 10%
5V 5%
+
-
+
-
Step 6: Connecting the Drive
Attach flat SCSI cable to connector at rear of CD-RW drive.
Notes:
The 50 pin flat SCSI cable must be firmly attached with its red edge
(Pin 1) positioned next to the power supply connector.
If computer has a Sound Card, an Audio Cable may be connected to the
rear of the CD-RW drive. Contact a local dealer if cable is required.
Interface Connector
Pin 1
Power Supply Connector
Red Edge
Audio
Cable
Audio Out
Connector
SCSI
Flat Cable
CD-R/W Drive Unit
Mounting Screws
Audio Cable
Flat Cable
Hardware Installation 13
12 Hardware Installation
Power Supply
Connector
Power Supply Cable