Precautions, Hardware installation, Location and function of parts and controls – Sony CD-R/RW User Manual
Page 4: Installing the drive unit into the computer, Getting started, Front panel rear panel
![background image](/manuals/154438/4/background.png)
Precautions
■
Installation
●
Avoid placing the drive in a location subject to:
– high humidity
– high temperature
– excessive dust
– mechanical vibration
– direct sunlight.
Only horizontal drive operation recommended, not vertical or tilted.
■
Operation
●
Do not move drive during operation, it may cause an error.
●
Avoid sudden temperature changes, condensation may form inside
the drive. Should ambient temperature suddenly change, wait at
least 1 hour before turning off power. Operation immediately after
temperature change may cause a malfunction.
■
Transportation
●
Keep the original packing materials for future transport of the drive.
Hardware Installation
Installing the Drive Unit into the Computer
This example assumes an IBM-PC/AT* compatible computer,
a SCSI adapter card and a SCSI interface cable (50 pin flat) are at-hand.
Getting Started
Assure SCSI adapter is operational before installing CD-R/RW drive.
●
Prepare the necessary parts and tools not supplied:
– a screwdriver
– Two mounting rails if computer has mounting racks.
Precautions/Hardware Installation 7
Location and Function of Parts and Controls
Front Panel
Rear Panel
6 Location and Function of Parts and Controls
0 1 2
AUDIO OUT
R GND L
INTERFACE CONNECTOR
DC INPUT
5V
±
5% GND 12V
±
10%
ACTIVE TERM
TEST
ID SELECT
Power-in connector
SCSI bus interface connector
Audio output connector
Jumper block for SCSI bus
Headphone
Volume
Control
Busy
Indicator
Disc Drawer
Emergency
Eject Hole
Eject
Button
Headphone
Jack