Woodstock W1770 - Manual (Page 48)

-46-
W1770 21" Bandsaw w/Foot Brake
M
A
INTE
N
A
N
CE
Lubricant Frequency Quantity
Multi-Purpose
GL2 Grease
As Needed Thin Coat
Table Tilt Rack and Pinion Assembly
To.lubricate.the.table.tilt.rack.and.pinion.assembly,.do.
these.steps:
1.. DISCONNECT BANDSAW FROM POWER!
2. With the table perpendicular to the blade, and using
a rag and mineral spirits, wipe off all existing grease
and sawdust buildup from the rack.
3. Move the table up to its maximum 45˚ angle and
wipe ( Figure.65) off all existing grease and sawdust
buildup from the rack.
4. Apply a thin coat of muilti-purpose grease to the
rack.
5. Move the table up and down several times to distrib-
ute the grease, then wipe off any excess grease.
Figure.65. Table tilt rack and pinion
assembly.
Lubricant Frequency Quantity
Multi-Purpose
GL2 Grease
As Needed Thin Coat
Trunnion
To.lubricate.the.trunnion,.do.these.steps:
1.. DISCONNECT BANDSAW FROM POWER!
2. Move the table up until it reaches its maximum 45˚
angle, and using a rag and mineral spirits, wipe off
all excess grease and sawdust from the trunnion.
3.. Apply a thin coat of light all purpose grease to the
outside surfaces of the trunnion ( Figure.66).
4. Move the table down and then back up to distribute
the grease, then wipe off any excess grease from
the trunnion.
Figure.66. Trunnion lubrication location.