Swann 4/9-SecuraNet SW243-4MB - Manual (Page 11)

7
5. Starting the DVR
5.1 Firmware Version
5.2 Detecting Installed Hard Drive
5.3 Format Hard Drive
DVR will detect the installed hard
drive and display the hard drive
information.
When the DVR detects a new hard
drive you will be prompted to format the
hard drive before using the DVR
Press [SEL] to format or press
[MENU] to cancel.
After connecting the power adapter
and turn on the power button, the system
will boot-up and display the version and
released date of the DVR’s current
firmware.