Sennheiser EK 2000 IEM - Manual (Page 10)

9
Product overview
ቧ Battery status Charge status:
approx. 100%
approx. 70%
approx. 30%
charge status is critical, the red
LOW BATT LED ¿ is flashing:
ቨ Muting function
“
MUTE ”
“ Mute ” is only displayed on the “ Frequency/
Name ” standard display (see page 15)
• when the transmitter’s RF signal is
deactivated or
• when the transmitter is set to mono mode
and therefore does not transmit a pilot
tone but the receiver’s pilot tone evalua-
tion is activated.
or audio channels The audio channels are only displayed on the
“
Frequency/Limiter ” and “ Frequency/High
Boost ” standard displays (see page 15)
Stereo
Focus
ቩ
Pilot tone “ P ” Activated pilot tone evaluation
(see page 26)
Display Meaning
¿