A-mode 1: no. 6, Bad aligned is chosen – Seiko BX-900 User Manual

Page 76

5 Pressing the Left and Right arrow key changes the Mode number

between 1 to 11 to select the best pattern within the mode.

6 Pressing the Up and Down arrow key changes the pattern number

between 0 to 12 to select the best pattern within the mode.

7 By scrolling to the desired pattern number and pressing the ENTER key, the selected printing

condition is set. When the condition is set, the corrected pattern of the selected print mode is
printed out.

8 Repeat the steps 5 through 7 until the start position adjustment is completed.

9 Pressing the EXIT key to exit from the start position adjustment (A-MODE). The bidirectional

printing adjustment (B-MODE) takes place automatically and the LCD indicates "B: VERT
ADJ".

10 Press the ENTER key to enter the bidirectional printing adjustment (B-MODE).

11 Repeat the steps 5 through 7 until the bidirectional printing adjustment is completed.

12 After all adjustments are completed, press the EXIT key, then the LCD indicates "PRESS

RESET SW". By pressing the RESET key, the printer exits from this vertical alignment mode.

LCD Description

Key Operation

Pattern No. (0-12)

Up and down arrow keys

Mode No. (1-11or 0-11)

Left and right arrow keys

A-MODE 1: NO. 6

HHH

Bad aligned is chosen

>---->

A-MODE 3

>---->

A-MODE 4

Best aligned is chosen

Best aligned

EXAMPLE

(To change the pattern No. 6 to 7 in A-MODE 4.)

A-MODE 3: NO.6

A-MODE 4: NO.6

PARK

QUALITY

A-MODE 4: NO.6

A-MODE 4: NO.7

M.RLF

M.LF

8. Maintenance (Vertical alignment mode)