Samsung SIR-TS360 - Manual (Page 72)

72
CHAPTER 5
Program reminders and recording timers
5 5
2 Highlight the program you wish to record or be reminded about, and press the SELECT button.
Pressing the SELECT button once sets a program reminder. Pressing it again sets the program
to be recorded on your VCR.
Once you have set a reminder, when the program is about to begin, the DIRECTV ® HD
Receiver displays a message reminding you about the program.
To use the program recording feature, you must have correctly connected and positioned the
VCR control cable. You must also set up the DIRECTV
® HD Receiver to communicate with your
VCR (see the first section of this chapter).
Make sure there is a tape in your VCR and that the VCR is turned off before the start time of
any programs you have set to be recorded.
Reviewing and modifying reminders and recording timers
The Timers item in the SETUP menu allows you to review, modify, or create new program
reminders and program recording timers.
Here’s how:
1 Press the MENU button on your remote control.
2 Highlight the Setup menu item, then press the SELECT button.
The Setup menu appears.
3 Highlight the Timers menu item, then press the SELECT button.
A clock icon is added to the
program listing when a program
reminder is scheduled.
A videotape icon replaces the clock
icon when a recording timer has
been scheduled.
SIR-TS360-CHAPTER 5 11/18/03 9:44 AM Page 72