Samsung SIR-TS360 - Manual (Page 14)

14
CHAPTER 1
Technical overview
1 1
For example, if you have a standard resolution TV, you would set the Resolution button
to 480p/i.
Then programs received by the DIRECTV
® HD Receiver at any resolution would be
converted to a resolution of 480p or 480i for display on your television.
This information can also be helpful when deciding how to connect your TV and VCR to
the DIRECTV
® HD Receiver. For example, if you have a High Definition TV capable of
displaying 1080i, and a standard VCR, you would want to use the COMPONENT, RGB
or DVI jacks (whichever your TV accepts) to connect the DIRECTV
® HD Receiver to your TV.
You would then use the VIDEO OUT jack to connect your VCR.
This will provide each device with the highest quality video signal it is capable of using.
NOTE
• If you connect your TV to one of the composite video out jacks (VIDEO OUT, S-VIDEO OUT), and
you view a HD program with the DIRECTV ® HD Receiver’s RESOLUTION button set to either 720p
or 1080i, the picture will be slightly cropped at the top and bottom (the very top and bottom
edges of the image will not appear on the TV screen).
To avoid this problem, set the RESOLUTION button to the 480p/i position if your TV is connected
to one of the composite video outputs. Also, since the RGB, COMPONENT and DVI jacks do not
output the 480i video format, do not connect a standard definition TV capable of displaying only
480i video to the RGB, COMPONENT or DVI jacks. If you use the DVI jack, for the best access to
HD programming, connect the DVI/HDCP output to the corresponding DVI/HDCP input on your
HD Television (HDTV) or HDTV Monitor that supports High-bandwidth Digital Content
Protection (HDCP) technology.
SIR-TS360-CHAPTER 1 11/18/03 9:41 AM Page 14