Sangean SANGEAN ATS-808A - Manual (Page 21)

CLOCK RADIO OPERATION
With this receiver you can fall asleep to
your favorite station by pressing the SLEEP
button, or wake you to the morning news,
or an alarm buzzer. Make the following
settings with the POWER off!
1. Press STANDBY button so display
shows 0:00. STANDBY will flash for
15 seconds.
2. Press the numbered buttons to activate
turn-on time using 24 hour time, in hours
and minutes. For example, to set the
radio to turn on at 1:30 PM each day,
press the buttons until the display shows
13:30. If the wrong number was
keyed-in, delete it by pressing the
CANCEL button marked
C . One
time for each number. Then press the
correct number for the time you want.
.
3. When you reach your desired turn-on time,
press ENTER, STANDBY stops flashing,
your turn-on time is locked in. For 2 to 3
seconds, the clock returns to the current
time automatically.
Setting the Alarm
21
TUNIGN