Sangean SANGEAN ATS-808A - Manual (Page 11)

BAND SELECTION
There are four band selector buttons
located just beneath the LCD display.
BAND FREQUENCY RANGE PROGRAM TYPE
FM 87.5~108 Mhz Standard FM
LW 150~519 Khz Longwave
MW 520~1710 KHz Standard AM
SW 1.711~29.999 Mhz SW/13 Sub-Bands
1. Turn radio on by pressing "POWER"
button. Display will show last band and
frequency selected.
2. By pressing any one of the four band
selector buttons the display shows the
band selected and a random frequency
within that band.
When you select SW you only have to press
the button marked "METER", and then any
one of the numbered buttons depending
upon what band you wand to listen to. The
display will show the band you selected and
a random frequency within that band.
NOTE
11
FM LW MW SW
METER
DIRECT ACCESS
FREQ
STANDBY
TUNIGN
MANUL/AUTO
FM LW MW SW
FM LW MW SW
POWER