Sony PCS-G70 FAQ - Manual (Page 15)

PCS-G50 and PCS-G70 Video Communication Systems
FAQ 9
Q. Does the PCS-G50/G70 support H.239 dual stream standard?
A. Yes, both PCS-G50 and PCS-G70 support H.239 standard and can
send dual stream data (video and XGA presentation) together
during the conference. In addition, PCS-G70 supports dual video
(main video and sub video) between PCS-G70 systems.
MCU FAQ
Q. How many sites can be connected with the built-in multipoint
function?
A. You can connect up to five remote sites (total of six sites) including
IP, ISDN, and ISDN telephone. By connecting two IP multipoint
terminals as a cascade, you can connect up to ten sites in one
multipoint conference.
Q. Does PCS-G50/G70 support Continuous Presence mode in
multipoint conferences?
A. Yes, PCS-G50/G70 displays the split screen (four-site or six-site)
as Continuous Presence mode, depending on the number of
participating sites.
Q. How does PCS-G50/G70 use bandwidth in a multipoint conference?
A. Bandwidth is divided for each participating terminal: Maximum
three sites at 1920 Kbps, two sites at 1280 Kbps. PCS-G50/G70
also supports Speed Matching between IP and ISDN. (For example:
IP at 1 Mbps with ISDN at 384 Kbps)
Q. How many screen layouts does PCS-G50/G70 support in a
multipoint conference?
A. PCS-G50/G70 supports the following screen layouts:
1. Voice Activated (Full Screen)
2. Continuous Presence 4-site (Split Screen)
3. Continuous Presence with Voice Activated six-site (Split
Screen)
4. Broadcast mode from any site in the multipoint or force
broadcast (Full Screen)
5. Force Broadcast with Continuous Presence in six-site mode
(Split Screen)
NOTE: PCS-G50/G70 supports only Full Screen mode in a
cascaded multipoint conference.