Sanyo SCP-200 - Manual (Page 22)

Installing the Battery
To install the LiIon battery:
1. Insert the battery into the opening on the back of the phone and
gently press down until you hear the battery snap into the place.
2. Place the battery cover into the position as indicated in the diagram,
then slide it until you hear it snap into the place.
Removing the Battery
To remove your battery:
1. Make sure the power is off. Press the battery release latch, then slide
the battery cover and remove it.
2. Use your thumbnail to lift and then remove the battery as indicated
in the diagram.
Section 2A: Your Sprint PCS Phone – The Basics 16