Enjoying blu-ray disc/dvd, One-touch play) – Sony nenuzhniy User Manual
Page 39
39
US
“BRA
VI
A”
Sy
nc
F
e
a
tu
re
s
4
Display the list of the HDMI
components on the TV menu, and set
the Control for HDMI function to on for
the connected components.
The Control for HDMI function for the
system and the connected components are
simultaneously set to on.
After you finish the setting, “COMPLETE”
appears in the front panel display.
• For details on setting the TV and the connected
components, refer to their operating instructions.
If “COMPLETE” does not appear
after performing the steps above
Set the Control for HDMI function to on for both
the system and the connected component
individually.
1
Press AMP MENU.
2
Press
X/x
repeatedly until “SET HDMI”
appears, then press
or
c.
3
Press
X/x
repeatedly until “CTRL
HDMI” appears, then press
or
c.
4
Press
X/x
to select “ON.”
5
Press AMP MENU.
The AMP menu turns off. The Control for
HDMI function is set to on.
6
Select the input of the system
connected to the component you want
to use the Control for HDMI function for
(SAT/CATV, DVD, BD).
7
Set the Control for HDMI function of the
connected component to on.
For details on setting the connected
component, refer to its operating
instructions.
If you add or reconnect a
component
Perform steps of “Preparing for “BRAVIA”
Sync” (page 38) and “If “COMPLETE” does not
appear after performing the steps above” again.
• If the Control for HDMI function for the connected
component cannot be set simultaneously by setting
“CONTROL FOR HDMI” of the TV, set the Control
for HDMI function using the menu of the connected
component.
• For details on setting the TV and the connected
components, refer to their operating instructions.
• The default setting of the Control for HDMI function
of the system is “ON.”
Setting the Control for HDMI
function to off
Set the Control for HDMI function to off when
you connect components not compatible with
“BRAVIA” Sync, or that do not have HDMI
jacks, etc.
1
Press AMP MENU.
2
Press
X/x
repeatedly until “SET HDMI”
appears, then press
or
c.
3
Press
X/x
to select “CTRL HDMI,” then
press
or
c.
4
Press
X/x
to select “OFF.”
5
Press AMP MENU.
The AMP menu turns off.
Play back a connected component.
The TV turns on automatically and switches to
the appropriate HDMI input.
Note
Notes
Tip
Enjoying Blu-ray Disc/DVD
(One-Touch Play)
AMP
MENU
C, X, x, c,
continued