Connecting the antenna (aerial), Connecting the am loop antenna (aerial), Remove only the loop part from the plastic stand – Sony nenuzhniy User Manual
Page 26: Set up the am loop antenna (aerial)
26
US
Connecting the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
Remove only the loop part from the plastic stand.
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
While pushing down the terminal clamp, insert the (*) part of the cords.
The cords can be connected to either terminal.
• Do not place the AM loop antenna (aerial) near the system or other AV component, as noise may result.
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly on the cord.
Connecting the antenna (aerial)
Note
Tip
SAT/CATV IN
BD IN
HDMI
DIGITAL
TV OUT
ARC
ANTENNA
AM
FM
75 COAXIAL
AUDIO IN
R
L
TV
AUDIO IN
SA-CD/CD
COAX IN
VIDEO
OPT IN
TV
SAT/CATV
ONLY FOR
SS-CT350
Rear of the
subwoofer
*