Sony CDP-X5000 - Manual (Page 15)

Recording From CDs
15 GB
Æ P p
)
)
0
0
+
c
=
C
Recording Your Own
Programme
You can record the programme you’ve created on a
tape, DAT or MD. The programme can contain up to 24
tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
1
Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
Follow Steps 1 and 2 in “Creating Your Own
Programme” on page 12.
2
When you record on both sides of the tape, press
P to insert a pause.
The “P” indication appears in the display and the
playing time is reset to “0.00”.
When you record on one side of the tape or on a
DAT or MD, skip this step and go to Step 4.
A pause is counted as one track
You can programme up to 23 tracks when you insert a
pause.
3
Repeat Step 1 to create the programme for side B.
4
Start recording on the deck and then press · on
the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for
side A.
5
When you record on side B, reverse the tape and
press
P or · on the player to resume playing.
You can automatically insert a blank space of 3
seconds between each track
Use the Auto Space function (see page 17).
You can check the total playing time while
programming (Programme Edit)
This feature helps you find the last track that will fit on
one side of the tape.
1 Press PROGRAM on the remote.
“PROGRAM” appears in the display.
2 Press = or + until the track you want to
programme appears in the display.
The total playing time including the selected track
appears in the display and the step number of the
programme flashes.
3 Press PROGRAM on the remote to confirm your
selection.
4 Repeat Steps 2 and 3 to programme other tracks.
To check and change your programme
See page 13.
“SIDE-A” appears while checking the programme for
side A and “SIDE-B” while checking the programme for
side B.
Recording From CDs
Number
buttons
PROGRAM
>20
CHECK
P
·