Sanyo SAC-MST6 - Manual (Page 13)

Check before requesting service
Symptom Possible Remedy
• Was power cord plugged in properly?
• Was water tank attached to the
Coffee/Tea is not brewing base properly?
• Was the switch in the "On/Keep
Warm" position, not "Off/Grind"?
• Was the switch in the "Off/Grind", not
Grinding does not start "On/Keep Warm"?
• Were grinder lid and grinder case
set properly?
• Was paper filter placed properly?
• Was it folded properly?
Coffee/Tea overflows • Was more than "Cups 6" water added?
• Were more than 6 measuring spoons
of coffee grounds used?
• Was coffee ground too fine?
Black fiber floats in coffee/tea
• Was charcoal filter washed well
prior to use? Wash again.
Oil floats in coffee/tea
• Coffee beans contain oil but are not
harmful to consume.
Brewing is very slow
• A residue in water is clogging inside pipe.
Follow special cleaning instructions.
If above troubleshooting did not solve problems, please stop using and contact
a qualified service person.
TROUBLESHOOTING
Power Source 120V 60Hz
Power
850W
Consumption
Dimensions
11 x 5 x 10
(w x d x h)
Weight 5.3 lbs.
Measuring Spoon,
Accessories Cleaning Brush,
Paper Filter (3 filters)
Power
850W
Consumption
Max. Water 27.4 oz.
Capacity
Power
140W
Consumption
Max. Capacity 1.62 oz. Grinding
Brewing
SPECIFICATIONS
12
3 ⁄
16
" 13 ⁄
16
" 7 ⁄
8
"