Sony Reader 4-151-151-13(1) - Manual (Page 12)

PRS-300.GB.4-151-151-13(1)
Getting Started

Make sure your computer is connected to an AC
outlet and turned on (not in sleep mode).

Connect the Reader to your computer using the
supplied USB cable.
appears on the Reader and charging starts.
USB cable (supplied)
Charge
indicator
To AC outlet
* The displayed screen during the USB connection varies
depending on the using environment.
Hints
• If Reader Library has not been installed on your computer, the
AutoPlay window appears (Windows only). ( page 15 )
• To check how much the Reader has been charged, disconnect
the Reader from your computer, then check the battery icon.
( page 13 )
• When the Reader is charged fully, the charge indicator (lights up
in red while charging) goes off.
Continued 12