Sony MK7807V1 - Manual (Page 113)

Applicable Models
PFV-HD50A HD Digital Video Interface Unit
Supplied Accessories
Operation manual (1)
Maintenance manual (1)
Slot number label (1)
The HKPF-D270 HDCAM Decoder Board is designed to
convert SDTI (HDCAM) signals to HD SDI signals
(conforming to SMPTE292M/BTA S-004B). The bit rate
and the maximum transmission distance are common
between SDTI and SDI. This means that by combining
HKPF-E270 HDCAM encoder and HKPF-D270 HDCAM
decoder boards, existing routing and processing
equipment for SDTV serial digital signals can be
upgraded to also support HDTV signals. This preserves
past investments.
Features
* Converts 270 Mb/s SDTI (conforming to SMPTE305M)
into 1.5 Gb/s HD component serial digital * Video with
eight channels of embedded audio signal *
Non-compressed digital audio signals * Adopts HDCAM
CODEC for superb picture quality and highly efficient
compression * Automatic detection of 1035/1080 active
lines input (59.94 Hz field frequency fixed) * Transmission
up to 200 m over SDTI (Belden 8281, Fujikura 5C2V or
equivalent cable) * 1125 or 525 reference input with
passive loop-through * Error correction function for
transmission of SDTI * Supports ISR * EDH detection
The HKPF Series function boards install in the PFV-HD Series Interface Units
together with the BKPF Series function boards.
111
Interface Processor D Series
Inter
face Pr
ocessor D Series
HKPF-D270
HDCAM decoder board
Rear Panel
*SGC_0099-0116 02.3.16 5:05 PM Page 111