Sunwave Tech. REMOTECOMM SRC-7000 User Manual

Page 14

SRC-7000 User’s Manual

The SRC-7000 VMCF file

A VMCF file contains the configuration for your remote control.
It can be created and modified using RemoteComm software.

It can also be stored on your computer hard disk.
You can download the VMCF file from the SRC-7000 to your PC
and modify it, or store it on your hard disk as a backup measure.

You can also transfer a VMCF file directly from one SRC-7000

remote control to another.
A VMCF file contains all the configuration data for the SRC-7000

including soft keys, macros, timers etc.
When you have backed up your VMCF file to your PC, you can

choose the "Open an existing VMCF file" option to modify it.

Connecting the SRC-7000 to a PC

Some functions within the software require you to connect the

SRC-7000 to a PC. For example, you will need to connect the

SRC-7000 to your PC when you upload or download
configurations. Connect your PC and SRC-7000 with the cable

provided as shown in the diagram below.