Sunwave Tech. REMOTECOMM SRC-7000 User Manual
Page 10
SRC-7000 User’s Manual
6
SRC-7000 RemoteComm installation
Insert the CD-ROM into your CD-Rom drive. Setup should begin
automatically. After installing the SLC-2080 USB cable driver, click
SRC-7000. The SRC-7000 RemoteComm software will install
automatically.
If Setup does not begin automatically, run the RemoteComm
7000.exe file in the CD root folder, or the AutoRun.ini file, to begin
Setup. Follow the on-screen instructions.