Changing the probe – GE XLG3 User Manual
Page 39
30
Chapter 3 Setting Up and Putting Away the System
GE Inspection Technologies XLG3 VideoProbe System
Changing the Probe
To Remove a Probe
1.
Shut down the probe.
a.
While viewing a live or frozen image, press
.
b.
Select Probe Shut Down.
2.
Open the probe latch. The probe pops out slightly.
3.
Gently slide the probe out of the handset.
To Install a Probe
1.
Open the probe latch.
2.
Slide the probe into the handset.
3.
Close the latch.
Latch
(partially open)