Sharp FO-IS125N - Manual (Page 96)

Authorized Transmission
94
Using the operation panel to activate Authorized
Transmission
Follow the steps below to activate (or deactivate) the Authorized Transmission
function using the operation panel.
♦
At least one supervisor must be stored before Authorized Transmission can
be activated.
1
Press , then until [AUTH. TRANSMISSION]
appears.
•
If the display shows [ENTER PASSWORD] after you press
, enter the administrator code and press .
2
Press .
Display: [ACTIVATE AUTH. TX]
3
Press (ON) to activate the function, or (OFF) to deactivate the
function.
•
If [SETUP APPROVER] appears, you must first store a supervisor as
expained on page 89.
4
Press to exit.
SECURE
SECURE
START
STOP