Maintenance – John Deere HR-BG5002 User Manual
Page 23
![background image](/manuals/130243/23/background.png)
Operator’s Manual
GENERAL CLEANING:
When the grill is cold, remove the grids. Cover three quarters of the Flav-R-
Wave with aluminum foil, shiny side down. Ignite the burners; operate the
grill on HIGH with the lid closed for 0 minutes or until smoking stops. Turn
the gas cylinder valve to OFF, turn the control knobs to OFF. When the grill is
cool, remove the foil, and residue from Flav-R-Wave with a vacuum. Remove
Flav-R-Wave, then clean the interior of the bottom oven by scrapping the
sides and vacuuming.
PERIODIC MAINTENANCE:
After you have finished, prepare for the next cookout by burning off any residue
of food from the grid and Flav-R-Wave in the following manner:
Cooking Grids (Fig. 8)
Remove all food from the grids, turn the control knobs to “HIGH”, and oper-
ate the grill with the lid closed for 5 to 0 minutes or until smoking stops. Turn
the gas cylinder valve to OFF, then the control knobs to OFF.
Use a long-handled wire brush to clean the grids. Remember that the grill is
hot, so wear kitchen mitts or use a pot-holder to handle the brush.
You do not have to wash the grids and upper cooking rack after each cook-
out, but if you wish to do so, use a mild soap and water solution, then rinse
them thoroughly. Never use a commercial oven cleaner.
flav-R-Wave (Fig. 9)
If any residue begins to accumulate on the Flav-R-Wave, remove cooking
grids and scrape excess residue with back of grill brush.
Maintenance
Fig. 8
Fig. 9