Infinity Powered Subwoofer Basslink II None - Manual (Page 8)

The REMOTE LEVEL control is used to adjust the
output level of the subwoofer. This level control
allows you to reduce the subwoofer output for
music with heavy bass content and increase the
level for music with less bass content.
PHANTOM CENTER Switch:The REMOTE LEVEL
control has a three-position switch that is used
when the BassLink 4sc amplifier is installed.
Please refer to the BassLink 4sc owner’s
manual for the specific operation of this switch.
I
NSTALLATION
O
PERATION
C ONNECTING THE REMOTE LEVEL
C
ONTROL TO
B
ASS
L
INK
II
The REMOTE LEVEL control may be mounted
under the dash or may be dismantled and
mounted in the dash for a factory appearance.
UNDER-DASH MOUNTING
Select a mounting location that allows easy
access to the control while driving. Using the
REMOTE LEVEL control as a template, mark and
drill holes in the mounting surface. Attach the
REMOTE LEVEL control using the mounting
screws provided (Figure 16).
Figure 16. Under-dash mounting of the REMOTE
LEVEL control.
Route the cable behind the dash or other interior
panels and under the carpet. Do not route the
cable outside the vehicle. Connect the RJ11 cable
between the RJ11 receptacle on the BassLink II
and the receptacle on the REMOTE LEVEL control
(Figure 17).
Figure 17. REMOTE LEVEL control electrical
connection.
Powered Subwoofer Basslink II
7