IPUX CS101A - Manual (Page 24)

- 23 -
Network >> Network
„ IP Setting
This item allows you to select the IP address mode and set up
the related configuration.
- DHCP: Select this option when your network uses the DHCP
server. When the camera starts up, it will be assigned an IP
address from the DHCP server automatically.
- Static IP: Select this option to assign the IP address for the
camera directly. You can use IP Finder to obtain the related
setting values.
IP Enter the IP address of the camera. The
default setting is
192.168.0.30 .
Subnet Mask Enter the Subnet Mask of the camera. The
default setting is
255.255.255.0 .
Default Gateway Enter the Default Gateway of the camera.
The default setting is
192.168.0.1 .
Primary/
Secondary DNS DNS (Domain Name System) translates
domain names into IP addresses. Enter the
Primary DNS and Secondary DNS that are
provided by ISP.
- PPPoE: Select this option when you use a direct connection
via the ADSL modem. You should have a PPPoE account from
your Internet service provider. Enter the User Name and
Password. The camera will get an IP address from the ISP as
starting up.
NOTE Once the camera get an IP address from the ISP as starting
up, it automatically sends a notification email to you.
Therefore, when you select PPPoE as your connecting type,
you have to set up the email or DDNS configuration in
advance.