Insignia NS-7HTV - Manual (Page 11)

9
Insignia NS-7HTV 7” Hand Held TV
www.insignia-products.com
Connecting the AC power adapter
To use the AC power adapter:
1 Make sure that your local AC power source matches the voltage
shown on the AC power adapter. If it does not, consult your dealer
or service center.
2 Connect the DC cord from the AC power adapter to the 9 V DC
jack on the right side of the TV, then plug it into the AC power
outlet.
Charging the battery
Your TV comes equipped with a built-in, rechargable NiMH battery.
This battery must be charged before you use it for the first time, and
periodically when it becomes discharged.
To charge the battery:
1 Turn off the TV.
2 Connect the DC cord from the AC power adapter to the 9 V DC
jack on the right side of the TV, then plug it into the AC power
outlet. The red PWR/CHG LED on the side of the TV will light red.
3 When the battery is fully charged, the PWR/CHG LED will turn off.
Unplug the AC power adapter to stop charging the battery when
this happens.
Caution
You must use a regulated ITE power source that supplies
9 V DC. The supplied AC power adapter meets these
specifications. Using an adapter that does not meet these
specifications could damage the TV or the adapter.
Caution
To protect your TV, unplug the AC power adapter from the
AC power outlet during heavy thunderstorms.
Note
Your TV can normally operate up to 100 minutes on a fully
charged battery. Recharge the battery when the sound level
decreases or the picture becomes unstable.