InFocus IN100 - Manual (Page 40)

Operation 40
FUNCTION DESCRIPTION
Preset Mode
Pre-defined picture modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a picture mode" on page 29 for details.
Brightness Adjusts the brightness of the image. See "Adjusting Brightness"
on page 30 for details.
Contrast Adjusts the degree of difference between dark and light in the
image. See
"Adjusting Contrast" on page 30 for details.
Color Adjusts the color saturation level -- the amount of each color in
a video image. See
"Adjusting Color" on page 31 for details.
Tint
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 31 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Sharpness Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 31 for details.
Brilliant
Color Adjusts white peaking while maintaining correct color
presentation. See
"Adjusting Brilliant Color" on page 31 for
details.
Color
Temperature
See "Selecting a Color Temperature" on page 31 for details.
3D Color
Management
See "3D Color Management" on page 32 for details.
Save
Settings
Saves the settings made for User mode.
Quick Auto
Search
See "Switching input signal" on page 24 for details.
2.
PI
CT
UR
E menu
3. SOU
RCE
menu