Intel 317443-001US - Manual (Page 56)

Intel ® 945GME Express Chipset—Heat Sink Installation Instructions
Intel ® Core TM 2 Duo processor with the Mobile Intel ® 945GME Express Chipset
Manual May 2007
56 Order Number: 317443-001US
7. While keeping the activation arm compressed, place the heatsink over the pins of
the heatsink backplate. Lower the heatsink until the lugs have inserted into the
base of the heatsink. Slide the heatsink over the lugs on the backplate pins so that
the base is directly over the processor die and the pins on the backplate have
traveled the entire length of the channel in the heatsink base. Slowly let go of the
activation arm until the base of the heatsink makes contact with the processor die.
The heatsink base should be flat on top of the processor die.
8. Plug the fan connector for the heatsink onto the CPU fan header (J3C1) on the
motherboard.
Figure 10. Installing the Heatsink