Connecting the earphones connection/installation, Connection/installation, Charging the battery – iRiver T20 User Manual
Page 8

14
Connecting the earphones
Connection/Installation
Getting started
1. Connect the earphones jack to the earphone socket on the player.
Connection/Installation
13
Getting started
Charging the battery
Note
You can charging the battery at tuned off the player.
Charging time : Approx. 3.5 hours (At fully discharged/Stop mode)
1. Connect the player to PC after push the USB lever and pull out the USB connection
port as below picture.
If the
icon is displayed, the battery is out of power and you should charge
the battery .
2. “USB Connected” on the display is appeared, charging indicator is displayed.
3. Disconnect the player to PC when charge is completed and then pull in USB
connection port as picture.