Intellinet Network Solutions 524438 User Manual
Page 23

in this list. If the list is empty, that means that no WPS-enabled AP is
in the range.
WPS Probe IE: The Wireless Provisioning Services Information Element
(WPS IE) makes it easier to connect to public Wi-Fi networks you’ve
not previously connected to. Your computer must have the WPS IE
update for Windows XP SP2 installed in order to use the function.
Automatically select the AP: Select to activate.
Rescan: Click to scan for WPS-enabled APs (perform a site survey).
Information: Select a found WPS-enabled access point, then click
“Information” to display that AP’s details in a pop-up window.
PIN Code: The WPS PIN Code of this network adapter is required for
connection.
SSID (lower panel): The service set identifier of the connected WPS-
enabled access point.
MAC Address: The MAC address of connected WPS-enabled AP.
Authentication (lower panel): The authentication type of connected
WPS-enabled access point.
Encryption (lower panel): The encryption type of the connected WPS-
enabled access point
Detail: Click to show details of a selected WPS-enabled access point.
Connect: Click to connect to a WPS-enabled access point on the list.
Rotate: Click to connect to next WPS-enabled access point on the list.
Disconnect: Click to disconnect from a connected WPS-enabled access
point. If there are other wireless access points in the profile, the last
CONFIGURATION
23