IBM X32 - Manual (Page 118)

1130 Sub card assembly
For access, remove following FRUs, in order:
v “1010 Battery pack” on page 76
v “1020 Hard disk drive” on page 77
v “1030 DIMM cover” on page 79
v “1040 DIMM” on page 80
v “1050 Backup battery” on page 81
v “1060 Keyboard” on page 82
v “1100 Keyboard bezel” on page 104
1
2
Step Screw (quantity) Torque
1 M2 × 4 mm, nylon-coated (2) 0.245 Nm
(2.5 kgfcm)
When installing: Make sure that the connector 2 on the
bottom side of the card is firmly
attached to the system board.
Removing and replacing a FRU
114 MT 2672, 2673, 2884, 2885