beautypg.com

Software installation – IOGear M0557 User Manual

Page 19

background image

19

Windows XP Fresh Installation
1. Power off the system. Insert the controller card into a PCI slot and connect the hard drives

to the controller card. Power up the system.

2. Put your Windows XP CD into the CD-ROM/DVD drive.
3. Press F6 for third party SCSI or driver installation. Press ‘S’ when setup asks if you want

to specify an additional device. Press ‘Enter’ and select ‘[CD Drive Letter]:\ SATA PCIe_

Raid5_2Port \SiI3132\Windows\Driver’.

4. Press ‘Enter’ to continue.
5. Follow the setup instructions to select your choice for partitions and the fi le system.
6. After setup examines your disks, it will copy fi les to the Windows installation folders and

restart the system. The setup program will continue and fi nish the installation after restart.

7. Wait until Windows fi nishes installing devices, regional settings, networking settings, and

components. Reboot the system if it is stated as a requirement.

Software Installation

This manual is related to the following products: