IOGear M0557 - Manual (Page 12)

12
1. Power down the computer system.
2. Insert the Host card into an available bus slot.
3. Power on the computer system.
4. Install drivers for the device.
5. Remove all existing SATARAID GUIs (or Java SATARAID GUIs) to ensure your new SATARAID5 GUI
installs and functions properly.
6. Install the SATARAID5 GUI.
7. Power down the computer system once again.
8. Connect Hard Drives to the proper SATA Ports.
9. Power on the computer system once again.
10. If you connect any used HDDs to the SATA Ports, Press CTRL+S or F4 and delete any RAID settings
that may be on the drives when using the BIOS boot method.
Installation Procedure