Insignia NS-RSW211 - Manual (Page 7)

7
Rocketboost™ Wireless Subwoofer
www.insigniaproducts.com
Connecting your subwoofer
Connecting the power
To connect the power and turn on your wireless subwoofer:
1 Plug the AC power cord into a 120 V wall outlet.
2 Click the Power switch to the right to turn on the wireless subwoofer.
The power indicator turns on.
Deciding on wired or wireless mode
This product can be used as a standard wired subwoofer or you can
upgrade to wireless when the subwoofer is used with other Rocketboost
products. If you want to setup the subwoofer in wired mode go to
“Setting up and using your subwoofer in wired mode” on page 8. If you
want to setup the subwoofer in wireless mode go to “Setting up and using
your subwoofer in wireless mode” on page 9.
4
Connect button If the wireless subwoofer is in standby, press to turn the wireless speaker on. Press and hold to
initiate wireless joining. Press again to go to standby mode.
5
Next Source button Press to select different audio streams on your Rocketboost wireless network. Each press
moves to the next source.
6
Low pass filter Turn full clockwise to set the filter cut-off frequency to 150 Hz and full counterclockwise to set
the filter cut-off frequency to 80 Hz.
7
Input select switch Select the Aux position (up position) to use the subwoofer in wired auxiliary input mode.
Select the Wireless position (down position) to use the subwoofer in Rocketboost wireless
input mode.
8
Aux input When using the subwoofer in Aux or Wired input mode, connect the subwoofer output of your
AV receiver to this input jack.
9 Power switch Click to the right to turn the power on. Click to the left to turn the power off.
# Feature Description
NS-RSW211_11-0334_MAN_V1.fm Page 7 Monday, May 9, 2011 7:01 PM