Insignia NS-RSW211 - Manual (Page 15)

15
Rocketboost™ Wireless Subwoofer
www.insigniaproducts.com
• The Rocketboost network must contain at least one wireless sender
device and one wireless receiver device. The wireless subwoofer is a
wireless receiver and it is used with a wireless sender (sold separately).
Specifications
Wireless Subwoofer
Problem Solution
No communication between the
Rocketboost sender and
subwoofer. • Make sure that the power indicators of the Rocketboost wireless sender and
subwoofer are lit solidly. If the indicators are blinking, see “Connecting your
subwoofer for wireless mode” on page 11.
• If the joining process is failing, make sure that only one of your Rocketboost devices
has the Hub switch enabled. Note that the hub device is the only device with the
green power indicator. Non-hub devices have a blue power indicator.
No sound • Check the volume level of the wireless subwoofer or audio sources connected to the
wireless sender.
• Make sure that all of the audio cables are connected correctly.
• Make sure that the power indicators of the Rocketboost wireless sender and
wireless receiver devices are lit solidly. If the indicators are blinking, see
“Connecting your subwoofer for wireless mode” on page 11.
• Make sure the audio source connected to your wireless sender is On.
• Make sure the wireless sender or wireless receiver devices are not Muted. The
Receive mode indicator light blinks when the device is muted.
Sound interference • Experiment with different orientations or locations of your wireless sender device.
• Make sure your wireless sender device is more than 18 inches from any WiFi routers
you may have.
• Shorten the distance between the Rocketboost wireless devices. The maximum
distance is 150 feet (45 m), but this distance is reduced as the wireless signal passes
through walls or other obstructions.
• It is possible other devices like cordless phones, microwaves, wireless routers, etc.
may be causing interference. Try turning one device off at a time to determine
which device is causing interference.
• If your cordless phone or wireless router is causing interference try changing the
channel it is using. Please refer to your device’s owner manual.
Power supply 120 V AC~60 Hz/0.9 A
Maximum RCA input signal level 2.0 Vrms
Crossover 80 Hz - 150 Hz
Speaker impedance 3 ohms
Rated output power (at 10% thd) 75 W
Dimensions (W × H × D)
11 Ч 11 Ч 11 inches
(28 Ч 28 Ч 28 cm)
Weight 10.4 lb. (4.7 kg)
NS-RSW211_11-0334_MAN_V1.fm Page 15 Monday, May 9, 2011 7:01 PM