beautypg.com

Connecting audio components, Connecting a turntable, Connecting speakers – Insignia NS-R2001 User Manual

Page 6: Connecting headphones

background image

4

Insignia NS-R2001 AM/FM Stereo Receiver

www.insigniaproducts.com

To connect the antennas:

1 Connect the FM antenna to your receiver.

2 Connect the AM loop antenna to the receiver.

Connecting audio components

Connecting a turntable

Connecting speakers

To connect your speakers:
• Connect your speaker cables to the receiver.

Be sure to connect the speakers firmly and
correctly according to the channel (left and
right) and the polarity (+ and -). If you do not
make the connections correctly, you will not
hear any sounds from the speakers.

If the sound is unnatural and lacks bass, the
speaker polarity is incorrect.

Connecting headphones

Note

If you are using an indoor FM antenna, change the
position of the antenna until you get the best
reception of your favorite FM stations.

To improve reception, you may use a 75

Ω

outdoor antenna instead of an indoor antenna.
Disconnect the indoor antenna before replacing it
with an outdoor antenna.

Note

Place the AM loop antenna as far as possible from the
receiver, television, speaker cords, and the AC cord.
Change the position of the antenna until you get the
best reception of your favorite AM stations.
To improve reception, you may use an outdoor AM
antenna instead of a loop AM antenna. Disconnect
the indoor antenna before replacing it with an
outdoor antenna.

Note

To connect a turntable with an MC type cartridge, use
a separate head amplifier or step-up transformer.

CD player

Tape deck

REC IN

REC (LINE) IN

PLAY OUT

MD recorder

PLAY (LINE) OUT

Turntable with MM-type cartridge

Caution

Use speakers with an impedance of 8

Ω

or more if

using only the SPEAKER A or SPEAKER B
terminals. Use speakers with an impedance over
16

Ω

or more if using both the SPEAKER A or

SPEAKER B terminals.

Do not let the bare speaker wires touch each other or
any metal part of this receiver. Doing so may damage
the receiver or speaker.

Notes

If you have only one pair of speakers, connect them
to the SPEAKER A terminals.

Speaker A

Speaker B

Left

Left

Right

Right

NS-R2001_10-0038_MAN_ENG.book Page 4 Wednesday, February 3, 2010 7:36 AM