Insignia NS-R2001 - Manual (Page 10)

8
Insignia NS-R2001 AM/FM Stereo Receiver
www.insigniaproducts.com
2 Press TUNE/PRESET to select the tuning mode.
3 Rotate the UP/DOWN knob quickly (over
several steps once) or press hold the TUNE
/ buttons for more than 0.5 seconds.
The tuner searches until a station of sufficient
strength has been found. The display shows the
tuned frequency and TUNE.
If the station found is not the station you want
to listen to, repeat this procedure.
Weak stations are skipped during auto tuning.
Manual tuning
Manual tuning is useful when you already know the
frequency of the station you want to listen to.
To manually tune a radio station:
1 Repeatedly press BAND on the receiver or
TUNER on the remote control to select AM or
FM.
2 Press TUNE/PRESET to select the tuning mode.
3 Rotate the UP/DOWN knob one by one slowly
or press the TUNE / buttons repeatedly
until the right frequency has been reached.
Note
Each time this button is pressed, the mode changes
as follows:
• TUNING mode—PRESET turns off.
• PRESET mode—PRESET lights up.
OR
Note
Each time this button is pressed, the mode changes
as follows:
• TUNING mode—PRESET turns off.
• PRESET mode—PRESET lights up.
OR
Band Frequency
OR
NS-R2001_10-0038_MAN_ENG.book Page 8 Wednesday, February 3, 2010 7:36 AM